Main Navigation

Search

Server,Room, Comms Room & Data Centre Cleaning Services

For All Stages of Your IT Room Life Cycle

Unsure of what cleaning needs to be done in your comms or server room or data centre? BACS services are available Australia-wide. Cleaning can be tailored to suit your room requirements. Let us help you! With over 40 years of experience, we are confident we can offer you expert advice, best practices, and methods that have been refined over the years. Our field staff are trained specialists.

NEW CONSTRUCTION - TURNING BUILDING SITES INTO CONTROLLED IT ENVIRONMENTS

post-construction cleaning

Post-Construction Cleaning

BACS post-construction cleaning prepares the room for equipment installation by removing particles generated during construction so they do not remain in the environment for years to come.

air particle testing

Air Particle Testing

Post-construction cleaning can be validated with indoor air particle testing before commissioning the room to assist in the eventual achievement of ISO 14644 particle level standards.

sub-floor cleaning

Sub-Floor Cleaning

After a comprehensive initial cleaning or major installation work, and annually thereafter, sub-floor cleaning removes contaminants that build up underneath the raised flooring.

SCHEDULED ROUTINE MAINTENANCE - IMPLEMENTING INDUSTRY BEST PRACTICES TO ATTAIN ISO 14644 STANDARDS

above-floor cleaning

Above-Floor Cleaning

Depending on the number of people entering the area, monthly or quarterly routine above-floor cleaning will preserve cleanliness levels throughout the year.

server rack cleaning

Server Rack Cleaning

BACS recommends that server rack interiors and pod exteriors undergo cleaning at least once a year to remove accumulated contaminants.

New International Data Centre Cleanliness Standard

air quality testing

Meeting the ISO 14644 standard is easy when data centre cleaning is planned, implemented, and routinely audited.

internal server and cpu cleaning

Internal Server & CPU Cleaning

Cleaning equipment inside, as well as outside, helps maintain particle level standards for the entire room.

ceiling void cleaning

Ceiling Void Cleaning

BACS cleans these areas to remove dust and debris left behind from original construction work and periodically thereafter to control build-up of contaminants.

overhead fixture cleaning

Overhead Fixture Cleaning

Where power and data cables enter server equipment from above, dust on overhead fixtures should be removed post-construction and every two years after that.

ADDITIONAL MAINTENANCE - PERFORMING PERIODIC SERVICES AND REMEDIATION PROCEDURES

plant room cleaning

Plant or Utility Room Cleaning

We can help you devise a maintenance schedule for plant rooms based on their environmental exposure to keep them in an optimum state of disaster readiness.

disaster recovery

Disaster Recovery

After a disaster BACS can decontaminate and remediate to help you return to normal facility operation as quickly as possible.

zinc whisker remediation

Zinc Whisker Remediation

Older facilities may require the removal of zinc whiskers from the underside of raised floor tiles and ceiling voids installed in the 1980s-90s.

floor scrub washing

Floor Scrub-Washing

Laminate tile and vinyl floors require periodic scrub-washing to remove accumulated dirt, grime and scuff marks.

vinyl floor resealing

Vinyl Floor Resealing

Vinyl floors need to have their top layer of acrylic sealer stripped off and re-applied on a regular basis.

mould cleaning

Mould Cleaning

Mould can easily occur in a comms room when an air conditioning unit is either leaking or causing condensation - it needs immediate remediation!